Bambu Lab A1 Mini 3D Printer
$419.00
- Ex Tax: $419.00
- Brands Bambu Lab
- Product Code: A1 Mini 3D Printer
- Availability: In Stock
The Bambu Lab A1 Mini 3D Printer revolutionizes flow control in 3D printing. It uses a high-resolution, high-frequency eddy current sensor to measure nozzle pressure. Our algorithm actively compensates the flow rate based on the readings to extrude accurately. The A1 mini handles various calibrations automatically. It automatically calibrates the Z-offset, bed level, vibration resonance, and nozzle pressure for every print job. The A1 mini arrives pre-assembled, pre-squared, and pre-tuned with precision. It only takes about 20 minutes to set up for your first print. It can calibrate parameters to match tiny individual differences between each drive motor. This compensates for the unwanted harshness of motor noise. Full-metal Rails, a rigid frame, a nozzle pressure sensor, accelerometers, a powerful MCU, and above all, an advanced motion control system that uses these features to print a 14-minute benchy with quality and follow all the speed benchy rules straight out of the box, without using specialized filaments. Remote control and monitor your printer on Bambu Studio or Bambu Handy. Through the built-in camera, you can also record timelapse videos.
Features:
- Build Volume: W180mm * D180mm * H180mm
- Hot End: All-Metal
- Nozzle: Stainless Steel
- Max Hot End Temperature: 300℃
- Nozzle Diameter: 0.4mm(Included), 0.2mm, 0.6mm, 0.8mm
- Build Plate: Bambu Textured PEI Plate(Included), Bambu Smooth PEI Plate
- Max Build Plate Temperature: 80℃
- Max Speed of Tool Head: 500mm/s
- Max Acceleration of Tool Head: 10000mm/s²
- Supported Filament: PLA, PETG, TPU, PVA (Ideal). ABS, ASA, PC, PA, PET, Carbon/Glass Fiber Reinforced Polymer(Not Recommended)
- Monitoring Camera: Low Framerate Camera(Up to 1080P), Timelapse Supported
- 49dB Whisper-Quiet Operation
- One-Click Maker World Integration
- Active Flow Rate Compensation
- Full Auto Calibration
- Plug-N-Play
- Active Motor Noise Cancelling
- Bed Slinger, with CoreXY Speed And Quality(High-Speed Precision)
- Sync with Bambu Studio and Bambu Handy
- To connect the A1 Mini printer to the AMS/AMS 2 Pro/AMS HT,an AMS HUB(SA013) accessory is needed.
Includes:
1 * Bambu Lab A1 Mini or A1 Mini Combo
1 * Purge Wiper
1 * Spool Holder
1* Build Plate
1* PTFE Tube
1*Bambu Filament Samples -20g (Random Color)
1*Stainless Steel Nozzle (Included)
1* Accessory Box
A1 Mini Combo Add-ons
AMS lite Body
AMS lite Stand
AMS lite Rotary Spool Holder(x4)
PTFE Tubes

















